You must have javascript enabled to use automultimeters.us !

True RMS Clamp Meter AC DC Volt Digital Multimeter Tester Auto Range

Resistance

USD $44.99

Condition : New

Free Shipping

{{variant_type_name}} :
eBay
SKU: HP-7200 This site contains affiliate links for which we may be compensated Business & Industrial / Test, Measurement & Inspection / Test Meters & Detectors / Multimeters

Notify me when the price drops

We will email you if we find a lower price on this product!

Target price (USD) $
 HP-7200-APP Multimeter Specification:   【Remotely Monitoring on Your Phone】Built-in wireless connectivity can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later. 【AC DC Clamp Amp Voltmeter NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC. 【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min/Avg on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full. 【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400A to support accurate amp reading, this clamp amp probe meter is more user-friendly for daily current measurement, such as troubleshooting car, boats battery. 【Clamp On Live Wire for Measurement】To measure amp with this clamp meter, you MUST separate the hot and neutral conductors, and clamp around only LIVE wire for measurement otherwise they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter.      Hp-7200-App Multimeter Feature Function:
  1. DC Current: 60A/400A ±(2.5% / 3.0% +10 digits)
  2. AC Current: 60A/400A ±(2.5% / 3.0% +10 digits)
  3. AC Voltage:6V/60V/600V ±(1.0% ~ 1.5% +3 digits)
  4. DC Voltage: 600mV/6V/60V/600V( +/- 0.5% ~ 0.8% + 2 digits)
  5. Resistance: 600Ω/6KΩ/60KΩ/600KΩ/6MΩ/60MΩ
  6. Capacitance: 6nF-60nF-600nF-6uF-60uF-600uF-6mF-60mF
  7. Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz
  8. Duty cycle:0.1%~99.9% ; Temperature Test: -4 ~ 1832 ℉
  9. Data Hold: Yes
  10. Diode Test: Yes 
  11. MAX/MIN/AVG: Yes 
  12. Front LED Lamp: Yes 
  13. Backlight Display: Yes 
  14. Overload Protection: Yes 
  15. Temperature Test (℃/℉): Yes 

Product List:

1 x 7200-APP Clamp Meter 1 x User Manual
2 x Test Leads (Pair)
1 x Small Screwdriver
1 x Temp Probe  

Hp-7200A 2000 Counts Current Clamp

➤True RMS clamp multimeter: The AC voltage and current measurement of the AP-7200A current clamp is a true RMS measurement that is more accurate for various waveform signals. Jaw size: 26MM.

➤ Non-Contact Voltage (NCV) Detection: With the NCV function of the BT-7200A multimeter, you can easily detect and recognize if there is electricity in the cable without touching or breaking the cable or risking electric shock.

➤Multi-Function Auto Range Clamp Meter: This portable clamp meter supports auto range selection, flashlight, function selection dial, data storage, max/min data, LCD display, backlight, auto power off, battery level indicator, over range, NCV, diode test and continuity buzzer.

➤Wide applications: The clamp tester is compact, easy to use, convenient to carry and has low power consumption. It is ideal for car maintenance, laboratory use, household appliance repair and electrical measurement.

General Specifications (7200A):

Maximum display: 1999
Sampling rate: 2 to 3 times per second
Over-range: display "OL" or "-OL"
Measurement principle: double integral A/D conversion
Working environment: temperature 0~40℃, relative humidity ≤80%
Storage environment: temperature -20~60℃, relative humidity ≤90%
Power supply: Two AAA batteries
Dimensions: 207 (H) × 75 (W) × 37 (D) mm
Weight approx. 280g (including battery)
Maximum clamp head opening size: 26 mm

DC voltage:

200mV/2V /20V ±(0.5% of measured value + 2 digits)
20V /600V ±(0.8% of measured value + 2 digits)
AC voltage (true RMS):
2V / 20V ±(1.0% of measured value + 3 digits)
200V ~ 600V ±(1.5% of measured value + 3 digits)
AC current (true RMS):
20A /200A ±(2.5% of reading + 10 digits)
400A ±(3.0% of reading + 10 digits)
Resistance:
0Ω ~ 200Ω ±(1.0% of reading + 3 digits)
2KΩ ~ 2MΩ ±(1.0% of reading + 2 digits)
2MΩ ~ 20MΩ ±(1.5% of reading + 3 digits)
Non-contact Voltage Detection:
NCV detection range: 90V (1000V AC rms)
When an AC voltage signal is detected, the flashlight lights up and the buzzer sounds.

Package list:

2 X Test Leads
1 X User Manual
1 X HP-7200A Hand-held Clamp Meter

7200B Clamp Meter  Description:

⚡⚡⚡HP-7200B TRMS Clamp Meter 6000 Counts 
➤【Multifunction Clamp Meter】 6000 Counts Auto-range AC/DC amps clamp multimeter with the DC Voltage range:600mV~600V, AC Voltage range:6V~600V, AC/DC Current: 60A~400A; Resistance:600Ω~60MΩ; Ideal Non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis.
➤【True-RMS Clamp Meter】 This multimeter can accurately measure AC/DC Current, AC/DC Voltage, Frequency or Duty Cycle, Resistance, Capacitance and also provides Diode, Continuity and Temperature tests in ℃. True RMS for accurate measurements on non-linear loads. Easy to use for labs factories and household.
➤【NCV Detection Function】Non-contact voltage detection effectively check electrical status through measuring EM field intensity without touching any wires; The NCV button lies on the left side of the rotary switch. Simply place your thumb on it and push.
➤【Accuracy AC DC AMP Meter】 This clamp meter with the AC/DC Current Range : 60A~400A; and it provides meaning full measurements at 0.1A or above. So you no need to worry to measure the low current readings; Note that for low-current measurements one can loop the wire around the jaw multiple times, multiplying the reading by the number of turns.
➤【Safety Guarantee】 Safety standard IEC 61010-1, CAT III 600V. Double insulation. 48 Months product warranty provided. 7/24 Customer Service. If you have any problems with our product, just contact us, and we will solve the problems for you ASAP.

7200B Technical Specifications:

1.  DC Voltage: *600mV/6V/60V ±(0.5%+2) *600V ±(0.8%+2)
2.  AC Voltage: *6V/60V ±(1.0%+3) *600V ±(1.5%+3)
3.  DC Current: *60A ±(2%+10) *400A/10A ±(3.0%+10)
4.  AC Current: *60A ±(2%+10) *400A ±(3.0%+10)
5.  Resistance: *600Ω ±(1.0%+3)*6kΩ/60kΩ/600kΩ/6MΩ ±(1.0%+2) *60MΩ ±(1.5%+3)
6.  Frequency: *9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz ±(0.1%+5)  
7.  Power Supply: 2*1.5V(AA) Battery(not included in packaged)
8.  Safety Class: IEC 61010-1, CAT II 600V

9.Capacitance:6nF/60uF ± (5.0%+ 10) 60nF/600nF/6uF ± (3.0%+ 10) 600uF/6mF/60mF ±(10%+20)  

10.Duty Cycle:0.1%-99.9%( ±2.0% of rdg+2 digits)

11.Temperature:-20-150 ℃(-4-302℉),150-1000℃(302-1832℉), Resolution:1 ℃/1℉,NiCr-NiSi K-type sensor, Overload protection: 250V DC or AC rms

Product Feature(7200B):

✔Diode Test
✔ Data Hold
✔ Continuity
✔ Backlight
✔ AC DC Current
✔ AC DC Voltage
✔ Relative Value
✔ Auto Power Off
✔ Temperature ℃

✔ Non Contact AC Voltage detection

 

Multi-Function Switches

The digital voltage clamp meter with clearly marked function buttons, for you quickly understand how to use it and satisfy all your needs of measuring.

Temperature Measurement

Place the temperature probe directly touch the object to be measured, the voltage amperage tester will display the temperature(℃/℉) value on the LCD screen.

Non-Contact Voltage Detection

This electric multi-clamp meter built-in non-contact voltage detector beeps if detecting a complete circuit. Just need to place the voltmeter near the test object.

 

Auto Power Off

The clamp multimeter will automatically shut down to save battery power if there is no operation within 15 minutes. Feature on low battery indication, you can replace the battery in time.

With Flashlight & Backlight

Equipped with a large LCD backlit and flashlight, the smart current clamp meter can easier get clear measuring in dimly light environments. User-friendly designs also protect your safety.

Correct Measurement

To measure AC current by clamping the meter around one line or one kind of wire; you should make sure not the whole power cord, otherwise the clamp multimeter displays 0 A.

Package Contents:(HP-7200B)
2 x Test Lead 
1 x User Manual
1 x Temperature Probe
1 x 7200B Digital Multimeter 

 

 7200 Series Clamp Meter Different

Function 7200A 7200B 7200-APP Display 2000 6000 6000 DC Voltage

200mV ~ 20V    ±(0.5% of rdg + 2 digits)

20V ~ 600V    ±(0.8% of rdg + 2 digits)

600mV/6V/60V±(0.5%+2) 600V±(0.8%+2) 600mV/6V/60V±(0.5%+2) 600V±(0.8%+2) AC Voltage(True RMS)

2V ~ 20V    ±(1.0% of rdg + 3 digits)

20V ~ 600V    ±(1.5% of rdg + 3 digits)

6V/60V ±(1.0%+3) *600V ±(1.5%+3) 6V/60V ±(1.0%+3) *600V ±(1.5%+3) DC Current NO 60A ±(2%+10) *400A±(3.0%+10) 60A ±(2%+10) *400A±(3.0%+10) AC Current(True RMS)

20A ~ 200A    ±(2.5% of rdg + 10 digits)

200A ~ 400A    ±(3.0% of rdg + 10 digits)

60A ±(2%+10) *400A±(3.0%+10) 60A ±(2%+10) *400A±(3.0%+10) Resistance

0Ω ~ 200Ω    ±(1.0% of rdg + 3 digits)

2KΩ ~ 2MΩ    ±(1.0% of rdg + 2 digits)

2MΩ ~ 20MΩ    ±(1.5% of rdg + 3 digits)

600Ω ±(1.0%+3)*6kΩ/60kΩ/600kΩ/6MΩ ±(1.0%+2) *60MΩ ±(1.5%+3) 600Ω ±(1.0%+3)*6kΩ/60kΩ/600kΩ/6MΩ ±(1.0%+2) *60MΩ ±(1.5%+3) Capacitance NO 6nF-60nF-600nF-6uF-60uF-600uF-6mF-60mF 6nF-60nF-600nF-6uF-60uF-600uF-6mF-60mF Frequency NO 9.999Hz~9.999MHz ±(0.1%+5) 99.999Hz~9.999MHz ±(0.1%+5) Duty Cycle NO 0.1%~99.9%: ± ( 2.0% of rdg + 2 digits ) 0.1%~99.9%: ± ( 2.0% of rdg + 2 digits ) Temperature NO -20-150 ℃(-4-302℉),150-1000℃(302-1832℉) -20-150 ℃(-4-302℉),150-1000℃(302-1832℉) APP NO NO Ailink-APP  

 

 

 
True RMS Clamp Meter AC DC Volt Digital Multimeter Tester Auto Range Resistance
plastic probe insulation
See more
Price type
IN STOCK OUT STOCK